Panelizing Small Sized PCBs
The complete size of panel has to be kept small while break-routing and many PCBs shouldn’t be placed in one panel. Material wasted by cutting off increases significantly if too many small sized PCBs are in a single panel. This also reduces the strength of your PCB. If the panel size is increased in break-routing while putting in small PCB designs, it’ll bend from the center when kept horizontally.
If the design can’t be changed, additional material is to be added within PCBs for strength reliability. Now let’s suppose we have a cutting tool which is 2mm wide which obviously needs a bigger clearance than its width for stability. In similar fashion, tolerance of 5mm isn’t stable because 2mm * 2mm clearance cut away will just leave 1mm which makes it more unstable.
Two small sized break-routed PCBs should be cleared from each other by a minimum of 10mm.
For a stronger panel, choose a wider one.
Break-outs tabs should be placed horizontally and vertically when break-routing is utilized. These tabs are hard to be defined or not possible at all for small PCBs since a minimum 5mm of accessible length is required to avoid improper placement.
Using V-cut method for board separation is often the most optimized and mechanically stable answer for panelizing small sized PCBs.
SMT Reflow Oven, Lead free Reflow Oven, Reflow Oven Manufacturer, LED reflow oven, PCB Reflow Oven, Nitrogen Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, wave soldering machine, Dual Rail Wave Soldering Machine, Nitrogen Wave Soldering Machine, Wave Soldering Machine Manufacturer.
|Flason Electronic Co.,ltd provide a full SMT assembly line solutions, including
SMT Reflow Oven,
Wave Soldering Machine,
Pick and Place Machine,
SMT Stencil Printer,
SMT AOI SPI Machine,
SMT Reflow Oven,
SMT Peripheral Equipment,
SMT Assembly line,
SMT Spare Parts
etc any kind SMT machines you may need, please contact us for more information:
wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: email@example.com
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service !