6 Head Pick And Place Machine HW06

Description:

6 Head Pick And Place Machine HW06

【Technical Parameters】

○Number of feeders：64pieces

○Number of mounting head：6head

○Number of pallets：6pieces

○Average power：500W

○positioning accuracy：0.01mm○Nozzle buffer range：4.5mm

○Power Supply：220V, 50Hz

○Compressed air: 0.5-0.6Mpa

○Drive motor: Panasonic servo motor /HW-QiGn stepper motor

○Identification mode: six head synchronous identification

○Suction nozzle vacuum source：High speed on-off vacuum generator with vacuum destruction

○Maximum board area：625×455mm

○XY maximum range of motion：629×679mm○Z axis maximum range：20mm○Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached to the chip)

○Maximum theory speed: 15000 Pcs/ hours

○LED, resistance capacitance actual patch speed: 12000 Pcs/ hours

○Hybrid visual mount average patch speed 8500Pcs/ hours

○XYZ drive rail: TBI high precision heavy duty linear guide rail.

○Motion drive system: Panasonic AC servo -A6 driver○Operating system: Based on the Windows operating system, China JAGUAR record company independent research and development automatic placement machine operating system, support Windows XP, win7 operating system

○Component angle: 0-360 degrees at any angle, the movement of synchronous rotation○X/Y mode of operation: QiGn-2017 version of intelligent curve acceleration and deceleration linkage system

○MARK point positioning: automatic scanning (can be arbitrarily set MARK points)

○Intelligent alarm: automatic correction, Automatic patch, lack of material alarm

○Into the plate mode: single segment from left to right transmission, can be connected to the automatic connection platform system, automatic PCB transmission positioning. Thimble positioning, manual release plate.

○Visual display: 17 inch industrial control display ratio 4:3 resolution 1280x1024

○Programming mode: peer to Peer programming, visual programming, PCB file import, etc.

○Optimization mode: three automatic optimization modes (including V2017 intelligent optimization)

○To identify the number of cameras: a Mark recognition camera, six high speed identification camera, a high resolution precision recognition camera

○Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes, transistors, SOT, and 40*40mm in the range of pin spacing is greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center), etc..

○Product weight：500KG

○Size (length and width): 1450*1370*1350mm (without display and keyboard)

Keywords:

JUKI RS-1R pick and place machine, JUKI RX-7R pick and place machine, Hanwha SM481 Plus Pick and Place Machine, Hanwha Decan S2 Pick and Place Machine, SMT pick and place machine, JUKI Pick and place Machine, Samsung Pick and Place Machine, Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine.